CreatorCut
Cut video, remove silence and add captions.
- Cuts videos and removes silent parts
- Generates automatic captions
- Resizes content for vertical and square formats
Media Doctor · Free tool
Type a timecode, a frame number or a time and get all three, at any common frame rate. Add a second value for the duration between them. Drop-frame is handled exactly.
Runs in your browser. It only does arithmetic; no file is read or uploaded.
Windows apps from SteveShines
Trim, cut and convert video without uploading it.
Cut video, remove silence and add captions.
Video downloader and local media toolkit.
Compress, convert to MP4 and fix playback errors.
01:00:00:12), a frame number (90012) or a real time (00:01:30.500).Timecode names every frame of a video as hours:minutes:seconds:frames. The last part counts frames within the second, from 00 up to one less than the frame rate: 00 to 23 at 24 fps, 00 to 29 at 30 fps. Editors use it to say exactly where a cut, a caption or an effect belongs.
frames = (hours × 3600 + minutes × 60 + seconds) × rate + frame part. At 24 fps, 00:01:30:12 is (90 × 24) + 12 = 2,172 frames.
seconds = frames ÷ exact frame rate. The exact rate matters: 23.976 is 24000/1001, 29.97 is 30000/1001 and 59.94 is 60000/1001. The calculator uses those fractions, so long durations do not drift.
At 29.97 fps, two frame numbers (;00 and ;01) are skipped at the start of every minute, except minutes 00, 10, 20, 30, 40 and 50. That removes 108 numbers an hour, which is the amount by which a 30-per-second count would otherwise fall behind the clock. At 59.94 fps, four numbers are skipped.
Working with subtitles instead? The Subtitle Shifter converts subtitle timing between 23.976, 24, 25 and 29.97 fps, and the Video Size & Bitrate Calculator works out file sizes.
Multiply hours, minutes and seconds out to seconds, multiply by the frames counted per second (24, 25, 30, 50 or 60) and add the frame part. At 25 fps, 01:00:00:00 is 3,600 × 25 = 90,000 frames. Drop-frame timecode needs a correction, which the calculator applies for you.
At 29.97 fps a clock that counts 30 frames per second runs slow by 3.6 seconds an hour. Drop-frame timecode fixes that by skipping two frame numbers at the start of every minute, except every tenth minute. No picture is dropped, only numbers. It is written with a semicolon: 01:00:00;00.
Use drop-frame when the timecode has to match real clock time, as in broadcast programmes with a fixed length. Use non-drop for short pieces and wherever every frame number must exist. Only 29.97 and 59.94 fps have a drop-frame form.
No. 23.976 is 24000/1001 frames per second, 0.1% slower than 24. Both count 24 frames per timecode second, so the timecode looks the same, but one hour of 23.976 timecode lasts 3.6 seconds longer in real time.
Enter the first timecode and put the other one in the second box. The calculator converts both to frames, subtracts them and shows the difference as timecode, frames and real time.
The frame part counts frames within the second, so it depends on the rate: half a second is frame 12 at 24 fps and frame 15 at 30 fps. The table shows the nearest frame to the same real time for each rate.